You may also like
Fyne Audio F1.8 Bookshelf Speaker - pair
Regular price
R 189,990.00
Fyne Audio F1.8 Bookshelf Speaker - pair
 |
 |
The F1-8 loudspeaker distils the same technology and expertise utilised in its floorstanding siblings, into a smaller standmount format. The hand crafted cabinet is supported on a machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the F1-8 features a 200mm IsoFlare low frequency driver mated to a 25mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Hand finished at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-8 represents the pinnacle of Hi-Fi UK loudspeaker design in standmount speaker format.
Specifications
| System Type | 2 way, downwards firing port, with BassTrax Tractrix diffuser* |
| Recommended amplifier power (Watt RMS) | 30 - 180 |
| Peak power handling (Watt) | 360 |
| Continuous power handling (Watt RMS) | 90 |
| Sensitivity (2.83 Volt @ 1m) | 91dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 33Hz - 34kHz |
| Drive unit complement | 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system |
| Crossover frequency | 1.8kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated |
| System adjustments | Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 470 x 280 x 441mm (18.5 x 11.0 x 17.4”) |
| Weight - Each | 15.2kg (33.5lbs) |
| Finishes | Piano Gloss Walnut |
Fyne Audio F1.5 Bookshelf Speaker - pair
Regular price
R 99,990.00
Fyne Audio F1.5 Bookshelf Speaker - pair
The F1-5 takes the same technology as the larger F1-8 sibling, distilling it into a neat bookshelf speaker design. The hand crafted cabinet is supported on compact machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the F1-5 features a 125mm IsoFlare low frequency driver mated to a 19mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Hand finished with care at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-5 is the pinnacle of UK Hi-Fi loudspeaker design distilled into a sumptuous compact bookshelf speaker design.
Specifications
| System Type | 2 way, downwards firing port, with BassTrax Tractrix diffuser* |
| Recommended amplifier power (Watt RMS) | 30 - 100 |
| Peak power handling (Watt) | 200 |
| Continuous power handling (Watt RMS) | 50 |
| Sensitivity (2.83 Volt @ 1m) | 87dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 48Hz - 38kHz |
| Drive unit complement | 1 x 125mm IsoFlare point source driver, multi-fibre bass/ midrange cone, FyneFlute surround with 19mm magnesium dome compression tweeter, neodymium magnet system |
| Crossover frequency | 1.9kHz |
| Crossover type | Single wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated |
| System adjustments | Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 321 x 186 x 289mm (12.6 x 7.3 x 11.4”) |
| Weight - Each | 5.7kg (12.6lbs) |
| Finishes | Piano Gloss Walnut |
